Polyurea Garage Floor Coating SJHB-08-ZR
Polyurea Garage Floor Coating SJHB-08-ZR
Polyurea Garage Floor Coating SJHB-08-ZR
Professional-Grade, High-Gloss Protection for Garages
SJHB-08-ZR is a two-component polyurea coating engineered for extreme durability in automotive and workshop environments. It creates a seamless, impermeable barrier against chemicals, abrasion, and impact while delivering a showroom-quality finish.
Why Choose SJHB-08-ZR?
-
Superior Chemical Resistance – Resists oil, grease, brake fluid, antifreeze, gasoline, and de-icing salts.
-
Exceptional Durability – 3x more abrasion-resistant than epoxy, with high impact and thermal shock resistance (-40°F to 200°F).
-
Fast Installation – Walkable in 2–3 hours, vehicle-ready in 8–12 hours. Applies in high humidity (up to 95% RH) and a wide temperature range.
Technical Highlights
| Property | Performance |
|---|---|
| Compressive Strength | ≥ 8,500 psi |
| Adhesion to Concrete | ≥ 500 psi (substrate failure) |
| Abrasion Resistance | ≤ 50 mg loss (Taber, CS-17) |
| UV Stability | 2,000 hrs QUV-A, ΔE < 2.0 |
| Full Cure Time | 24–48 hours |
Professional Application
Surface Prep:
-
Concrete must be shot-blasted to CSP 3–4, with moisture ≤ 75% RH.
-
Joints and cracks filled with polyurea joint filler.
Three-Stage System:
-
Primer (SJHB-202-WJ) – Enhances adhesion, 200–300 ft²/gal.
-
Base Coat (SJHB-08-ZR) – Spray-applied, 20–25 mils DFT.
-
Topcoat (SJHB-101-YT) – UV and chemical protection, 300–400 ft²/gal.
Finish Options: High-gloss, satin, anti-slip, and decorative flake systems available.
Packaging & Storage
-
Available in 200L drums.
-
Store at 5–35°C in sealed containers, away from sunlight.
Ideal for residential, commercial, and industrial garages requiring a durable, chemical-resistant, and visually appealing floor system.
